Item Description:
The mother liquor refers to the liquid medium connected to the microbial strain. After a period of cultivation, the microorganism utilizes the nutrient components in the medium to synthesize the bacterial body and the secreted product. The liquid metabolized by the microorganism is called a fermentation liquid.

JPG yeast liquid (fermentation) special spray dryer works:
This machine is a drying device that uses a high-speed centrifugal atomizer to disperse the material into a mist, and fully contact with hot air to complete the instant drying to form a powdery finished product. The air passes through the primary effect and medium efficiency filter, and is heated by the heater to the air distributor at the top of the dryer. The hot air enters the drying chamber in a spiral shape uniformly, and can be dried in a short time with the hot air. Finished product. The finished product is continuously output from the bottom of the high efficiency cyclone, and the exhaust gas is discharged by the induced draft fan.

JPG yeast liquid (fermentation) special spray dryer equipment features:
(1) The drying speed is very rapid. After the liquid is sprayed, the surface area is increased. In the high-temperature airflow, most of the water can be evaporated in an instant, and the drying time is generally only about 5-40S.
(2) The temperature of the droplets during the drying process is not high and the product quality is good. The temperature range used for spray drying. Even if high temperature hot air is used, the exhaust air temperature will not be very high. In the early stage of drying, the material temperature does not exceed the wet bulb temperature of the surrounding hot air, which is especially suitable for heat sensitive materials.
(3) The product has good dispersibility, fluidity and solubility. Since the drying process is carried out in air, the product intrinsically maintains a spherical shape similar to the droplets and has good fluidity.
(4) The production process is simplified and the operation and control are convenient. Sprays are usually used to treat solutions with a moisture content of 40% to 90%. They can be dried into powdered products at one time. Most products do not need to be pulverized and screened after drying, which reduces the production process and simplifies the production process. The particle size, bulk density and moisture of the product are within a certain range, and the operating conditions can be adjusted to make the control convenient.

• 
  JPG yeast special spray dryer
• 
  JPG yeast special spray dryer
• 
  JPG yeast special spray dryer
• 
  JPG yeast special spray dryer

No related video yet...

There are no relevant cases yet...