GPG high temperature pyrolysis spray dryer

Products

Current location：Home > Products > Spray drying advantage project > GPG high temperature pyrolysis spray dryer

< >

Key word：GPG high temperature pyrolysis spray dryer

Classification：Spray drying advantage project

Product overview：This machine is a drying device that uses a high-speed centrifugal atomizer to disperse the material into a mist, and fully contact with hot air to complete the instant drying to form a powdery finished product...

Details Photo gallery Video

GPG high temperature pyrolysis spray dryer works:

This machine is a drying device that uses a high-speed centrifugal atomizer to disperse the material into a mist, and fully contact with hot air to complete the instant drying to form a powdery finished product.

The air passes through the primary effect and medium efficiency filter, and is heated by the heater to the air distributor at the top of the dryer. The hot air enters the drying chamber in a spiral shape uniformly, and can be dried in a short time with the hot air. Finished product. The finished product is continuously output from the bottom of the high efficiency cyclone, and the exhaust gas is discharged by the induced draft fan.

GPG high temperature pyrolysis spray dryer special spray dryer equipment features:
(1) The drying speed is very rapid. After the liquid is sprayed, the surface area is increased. In the high-temperature airflow, most of the water can be evaporated in an instant, and the drying time is generally only about 5-30S.
(2) The temperature of the droplets during the drying process is high and the product quality is good. The temperature range used for spray drying is controllable. Its exhaust air temperature can be adjusted.
(3) The product has good dispersibility, fluidity and solubility. Since the drying process is carried out in air, the product intrinsically maintains a spherical shape similar to the droplets and has good fluidity.
(4) The production process is simplified and the operation and control are convenient. Sprays are usually used to treat solutions with a moisture content of 60%-90%. They can be dried into powdered products at one time. Most products do not need to be pulverized and screened after drying, which reduces the production process and simplifies the production process. The particle size, bulk density and moisture of the product are within a certain range, and the operating conditions can be adjusted to make the control convenient.